PA尼龙碳纤导电20 CF 防静电PA6

更新时间：2025-02-07 浏览数：417
所属行业：塑料通用/工程塑料

发货地址：广东省东莞市常平镇白花沥村
产品数量：10000.00kg
价格：￥32.00 元/kg 起

在线留言

品名:PA永防静电

材质:PA永久性防静电

型号:RE-H800

表面电阻率:10⁷ -10¹¹Ω

颜色:本色，可配色

成型工艺:注塑、挤出级

用途:脚轮、管材、汽车配件、电器外壳、电子零配件等

Physical Properties	Metric	English	Comments
Specific Gravity	1.25 g/cc	1.25 g/cc	ASTM D 792
Additive Loading	25 %	25 %	Primary Additive
Linear Mold Shrinkage	0.00050 - 0.0020 cm/cm @Thickness 3.20 mm	0.00050 - 0.0020 in/in @Thickness 0.126 in	ASTM D 955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	224 MPa	32500 psi	ASTM D 638
Elongation at Break	2.0 - 3.0 %	2.0 - 3.0 %	ASTM D 638
Tensile Modulus	19.3 GPa	2800 ksi	ASTM D 638
Flexural Strength	328 MPa	47500 psi	ASTM D 790
Flexural Modulus	15.2 GPa	2200 ksi	ASTM D 790
Izod Impact, Notched	0.801 J/cm @Thickness 3.20 mm	1.50 ft-lb/in @Thickness 0.126 in	ASTM D 256
Izod Impact, Unnotched	7.47 J/cm @Thickness 3.20 mm	14.0 ft-lb/in @Thickness 0.126 in	ASTM D 4812

Electrical Properties	Metric	English	Comments
Volume Resistivity	<= 10 ohm-cm	<= 10 ohm-cm	ASTM D 257
Surface Resistance	<= 10000 ohm	<= 10000 ohm	ESD STM11.11
Surface Resistivity per Square	<= 1e+05	<= 1e+05	ASTM D 257
Static Decay	<= 0.50 sec	<= 0.50 sec	FTMS101C; 4046.1

Thermal Properties	Metric	English	Comments
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in

Processing Properties	Metric	English	Comments
Melt Temperature	277 - 299 °C	530 - 570 °F
Mold Temperature	65.6 - 107 °C	150 - 225 °F
Drying Temperature	79.4 °C @Time 14400 sec	175 °F @Time 4.00 hour
Moisture Content	0.20 %	0.20 %
Dew Point	-17.8 °C	0.000 °F
Injection Pressure	68.9 - 124 MPa	10000 - 18000 psi

Physical Properties Metric English Comments

Specific Gravity 1.25 g/cc 1.25 g/cc ASTM D 792

Additive Loading 25 % 25 % Primary Additive

Linear Mold Shrinkage 0.00050 - 0.0020 cm/cm
@Thickness 3.20 mm 0.00050 - 0.0020 in/in
@Thickness 0.126 in ASTM D 955

Mechanical Properties Metric English Comments

Tensile Strength at Break 224 MPa 32500 psi ASTM D 638

Elongation at Break 2.0 - 3.0 % 2.0 - 3.0 % ASTM D 638

Tensile Modulus 19.3 GPa 2800 ksi ASTM D 638

Flexural Strength 328 MPa 47500 psi ASTM D 790

Flexural Modulus 15.2 GPa 2200 ksi ASTM D 790

Izod Impact, Notched 0.801 J/cm
@Thickness 3.20 mm 1.50 ft-lb/in
@Thickness 0.126 in ASTM D 256

Izod Impact, Unnotched 7.47 J/cm
@Thickness 3.20 mm 14.0 ft-lb/in
@Thickness 0.126 in ASTM D 4812

Electrical Properties Metric English Comments

Volume Resistivity <= 10 ohm-cm <= 10 ohm-cm ASTM D 257

Surface Resistance <= 10000 ohm <= 10000 ohm ESD STM11.11

Surface Resistivity per Square <= 1e+05 <= 1e+05 ASTM D 257

Static Decay <= 0.50 sec <= 0.50 sec FTMS101C; 4046.1

Thermal Properties Metric English Comments

Flammability, UL94 HB
@Thickness 1.50 mm HB
@Thickness 0.0591 in

Processing Properties Metric English Comments

Melt Temperature 277 - 299 °C 530 - 570 °F

Mold Temperature 65.6 - 107 °C 150 - 225 °F

Drying Temperature 79.4 °C
@Time 14400 sec 175 °F
@Time 4.00 hour

Moisture Content 0.20 % 0.20 %

Dew Point -17.8 °C 0.000 °F

Injection Pressure 68.9 - 124 MPa 10000 - 18000 psi

我司生产的导电原料之表面电阻率可达10E1-5欧姆之间，防静电原料之表面电阻率可达10E6-11欧姆之间，可广泛应用于航天、航空、兵工、电子、船舶、通讯、电子电器、包装等领域的注塑、挤出、吹塑、吸塑等相关产品。公司销售市场主要集中在亚太和欧洲等地区。产品主要覆盖以下四大系列：

导电防静电工程塑料：PA、PC、PC/ABS、PBT、POM、PPS、PEI、PES、PSU、LCP
导电防静电泛用塑料：ABS、PS、PP、PE、PPO/PPE
导电防静电热塑性弹性体：TPE、TPR、TPU、TPV、PVC、EVA
导电防静电填充助剂：不锈钢（金属）纤维母粒、永久性防静电母粒、导电（炭黑）母粒、普通防静电母粒、抗静电液等产品。

（更多产品咨询何先生）

Surface Resistivity

For thermoplastic materials intended to dissipate electrostatic charges, surface resistivity is the most common measurement of a material’s ability to do so.

A widely accepted surface resistivity test method is ASTM D257. It consists of measuring the resistance (via an ohm meter) between two electrodes applied under load to the surface being tested. Electrodes are used rather than point probes because of the heterogeneous makeup of compounded thermoplastics. Simply touching the surface with a point contact may not give readings consistent with the overall part (readings of this type are often insulative even when the part is actually conductive).

It is also important to maintain good contact between the sample and electrodes, which can require considerable pressure. The resistance reading is then converted to resistivity to account for the dimensions of the electrodes which can vary depending on the size and shape of the test samples. Surface resistivity is equal to resistance times the perimeter of the electrodes divided by the gap distance, yielding ohms/square.
http://maisujiao.cn.b2b168.com